Introduction Of PE Pipe Tubes

As a Nylon Plastic Plug Factory, let us introduce PE pipe tubes.

The plastic pipe is generally made of synthetic resin, that is, polyester is used as a raw material, and a stabilizer, a lubricant, a plasticizer, etc. are added, and is extruded in a pipe making machine by a "plastic" method. Because of its light weight, corrosion resistance, beautiful appearance, no bad smell, easy processing and convenient construction, it has been widely used in construction engineering. It is mainly used as a water supply system for house construction. The piping, drainage and exhaust are used in non-metallic pipelines. The most widely used plastic pipes are plastic pipes. There are many types of plastic pipes, which are divided into thermoplastic pipes and thermosetting plastic pipes. Among the thermoplastics, there are polyvinyl chloride pipes, polyethylene pipes, polypropylene pipes, polyacetal pipes, etc.; they are thermosetting phenol plastic pipes. The main advantages of PE Pipe Tubes are good corrosion resistance, light weight, convenient molding, easy processing, and low strength and poor heat resistance. And the sewage pipe, the underground drainage pipe system, the rainwater pipe and the threading pipe for the installation of the wire. The layout of the drainage outlet pipe has a great influence on the design flow of the system. The connection between the riser and the discharge pipe is to use a different diameter elbow. The outlet pipe is preferably larger than the riser pipe. The outlet pipe should discharge the sewage as far as possible without any elbow or B-tube. Many projects have confirmed that the thinner drainage outlet pipe and the increased pipe fittings on the outlet pipe will adversely change the pressure distribution inside the pipe, reduce the allowable flow rate value and prone to poor drainage of the toilet in the future use.