As a Plastic Tape Plastic Core Wholesaler, share with
you.
PET is a milky white or light yellow highly crystalline polymer with a smooth
and shiny surface. It has excellent physical and mechanical properties in a wide
temperature range. The long-term use temperature can reach 120 ° C, melting
point: 250-255 ° C, density at 25 ° C: 1.68g / cm3.
PE Plastic Tube Core
Advantages and disadvantages of PET materials:
advantage:
Good mechanical properties
Resistant to oil and most solvents
High and low temperature resistance
High transparency and good gloss
Non-toxic and safe for living
Disadvantages:
Slow crystallization speed
Corona resistance is poor
Alkali-resistant
Acid intolerance
Heat-resistant water
In the process of PET material recycling, the quality of the recycled materials must be identified. As long as you learn the following measures, you can easily get it. Our company has Packing Plastic Tube Core on sale.
First, burn
If the part burned by PET is too black or the oil droplets are distributed quickly, most of the melting points are abnormal, which is often found in PET film. Generally, the melting point of bottle flakes is not a problem.
Second, smell
PET smells different from ordinary plastics when burning, and it will smell very aromatic and comfortable (just burn a bottle to smell it); if PET contains other ingredients, the taste will be pungent. One type of bottle contains SEBS, which cannot be used during recycling.
Third, pull
When the PET is burning, pull the wire a little, look at the length of the wire, and then break the drawn wire. Look at the break point in the middle. Whether the wire is rolled into a small circle.
The last and key point is to distinguish whether PVC is contained in the returned material. Recycled PET containing PVC is almost unusable. Specifically, it can be distinguished by flattening in a sunny place after sampling and observing the color of the sample. PVC is light blue in the sun, and there will be white creases if folded in half. The above is the naked eye identification with limited accuracy, which mainly depends on experience.
In order to accurately identify whether the PET material contains PVC, you need to buy an oven first.
Fourth, baking
Set the oven temperature to 250 ° C, place the sample in the oven for half an hour, and then remove the sample for observation.
If there are many yellow spots on the surface of the sample, the sample contains PVC. If the sample melts quickly in the oven, the sample has a lower melting point (PET melting point: 250-255 ° C).
After reading the introduction of the method of identifying PET recycled materials, I believe you can easily find high-quality PET recycled materials.
Our company also has PE Plastic Tube Core on sale, welcome to consult.