Packing Plastic Tube Core is widely used in all walks of life. Do you know its advantages?

Packing Plastic Tube Core is widely used in all walks of life. Do you know its advantages?

As an ABS Plastic Tube Core Supplier, share some information.

Reduce loss

High strength, non-deformation, and stable physical properties, effectively preventing damage to the wrapped film due to deformation of the core. The processing precision is high, the surface smoothness is good, the utilization rate of the film can be increased, and the drawback that the traditional shaft tube has to be filled and filled by the wrapped film due to the rough surface is solved.

2. Large carrying capacity

Longitudinal strength and high ring strength make it highly loaded.

3. Reusable

Corrosion-resistant, impact-resistant, free from environmental factors such as moisture and acidity.

4. Cut and clean (except PVC pipe)

Cutting does not produce hair cutting, suitable for clean room environment

5. Repairable
                                                               
                                                                                                                                           ABS Plastic Core

Background technique

Packing Plastic Tube Core is a component used to crimp ribbons such as various films, tapes or papers to facilitate storage and transportation of the product.

The core tube is made of different materials, including paper core tube, plastic core tube and metal core tube, depending on the product to be crimped. The plastic core tube is widely used because of its light weight, smooth surface, wear resistance and deformation resistance.

In the prior art, since the surface of the core tube is relatively smooth, it is troublesome when the material is wound onto the core tube. The core tube currently used is a hollow tube with a smooth surface. When the material to be crimped has a certain thickness, a rib is formed at the contact between the starting end of the material and the surface of the core tube. The curl of the next turn of the material also produces protrusions. When the material is completely wound on the core tube, due to the large pressure of the winding, the material wound on the first few turns will have obvious creases. Some thin film materials with high surface smoothness, such as optical films, have an effect. For the performance of the product, the material with creases on the first few turns is discarded, which increases the user's cost of use and resources. Caused a great waste.

The advantages of ABS Plastic Core are as follows:

1. Light weight, heat insulation, heat preservation, moisture proof, flame retardant, acid and alkali resistance, corrosion resistance.

2. Stability, dielectric properties, durability, anti-aging, easy to weld and bond.

3. Strong bending strength and impact toughness, and high elongation at break.

4. It is easy to process and form by kneading, kneading, pulling, pelletizing, extrusion or die-casting, which can meet the needs of various profile specifications.

5. The surface is smooth, the color is bright, the decoration is very decorative, and the decorative application is wider.

6. The construction process is simple and the installation is convenient.